Home FAQ About Us
"Why?" you say !!! WHY NOT !!! A polished billet 6-71 blower sticking out of a hood is as intimidating as your first girlfriend. This is for the car sitting in your garage that you just want to make a statement with. This engine makes no excuses. You want power from idle to 6,000 rpm? Here it is, just waiting to be unleashed. Full forged rotating assembly holds this power for dependability. Dual Holley 600 carburetors feeds this monster with a single feed stainless steel fuel line. A healthy tone from the exhaust along with the whine of the blower will signal your arrival long before you get there.

• Individually dyno tested &
Calibrated with print out
• Very strong exhaust tone
• Requires 91 octane fuel
• Requires 2,500 stall converters
• Requires Vacuum pump for power brakes
• Recommend electric fuel pump
• 2 year limited warranty, unlimited mileage
 Click here for Articles
Smeding 383 Blown Features
Block: New GM 4 Bolt Main, Diamond Honed with Torque Plates. 9.025 Deck Height, 1 Piece Rear Main Seal.
Crankshaft: Forged Steel with .092 Filet Radius, Micro Polished, Chamfered, Zero Balanced, 3.800” Stroke, lightning holes in all 4 Throws.
Rods: High Strength 4130 Forged Steel “I” Beam With ARP WaveLock Rod Bolts, Balanced In Sets.
Pistons: Forged Dish, 8.8 to 1 compression, H.D. Blower type with anti-detonation grooves
Rings: Low Friction Single Moly 5/64” x 5/64” x 3/16”
Camshaft: Custom Ground Hydraulic Roller .510”/.521” lift 231°/236° Duration @.050”, 113° Lobe Centers
Rocker Arms: 1.5 Ratio, Full Roller with Extra Large Trunions
Intake: The Blower Shop Billet 6-71, 13% underdriven
Cylinder Heads: Performer RPM 2.02/1.60 Stainless Valves, 64cc Chambers, 170 cc Intake Port Volume for Great Throttle Response
Carburetor: 2 Polished Holley 600 Double Pumpers, Custom Calibrated for Blower Application
Distributor: MSD Ready to Run setup for Blower (does not require box)
Smeding 383 Blown Options
Standard Flywheel: Add $175
High Volume Oil Pan: Add $210
Electronic Fuel Injection: Call
Highflow Waterpump (Polished): Add $289
Accessory Drives:
Click here for more information and pictures.
With A/C and With Power Steering $2,145
With A/C and Without Power Steering $1,795
Without A/C and With Power Steering $1,745
Without A/C and Without Power Steering $1,395