|
|
 |
 |
|
With the knock out punch of a big block in a small block package, this engine has become our most popular Chevy stroker. Gobs of tire-frying low end torque and a very noticeable exhaust thump are the signature for this engine. Don’t let the big power numbers scare you, this is a street engine through and through with some bad boy thrown into the mix. Check the specs and you'll see that we haven't held nothing back. Power? Absolutely! As you can see by the power output graph, this engine produces a very broad, strong torque curve that is not only good for cruising, but for high performance as well. Power brakes and overdrive automatics work great with this powerful combination too. Add the polish package and a Concept One billet serpentine belt drive system or the dual-quad carburetor package to make this powerhouse a show-winning masterpiece.
|
|
• Dyno Tuned and Calibrated with print out
• Noticable Exhaust tone
• Requires 2,500 stall converter
• Works with power brakes
• Requires 91 Octane fuel
• Works well with overdrive
• Accepts mechanical fuel pump
|
Click here for Articles |
|
 |
 |
 |
 |
|
 |
 |
| Smeding 383 Extreme Features |
|
| Block: |
New GM 4 Bolt Main, Diamond Honed with Torque Plates. 9.025 Deck Height, 1 Piece Rear Main Seal. |
| Crankshaft: |
Forged 4340 Steel with .092 Filet Radius, Micro Polished, Chamfered, 3.800” Stroke, lightning holes in all 4 Throws. |
| Rods: |
High Strength 5140 Forged Steel “I” Beam With ARP WaveLock Rod Bolts, Balanced In Sets. |
| Pistons: |
Hypereutectic 9.8 to 1 with Anti-Friction Graphite Coating to Reduce Friction, Full Floating. |
| Rings: |
Low Friction Single Moly 5/64” x 5/64” x 3/16” |
| Camshaft: |
Custom Ground Hydraulic Roller .510”/.521” lift 231°/236° Duration @.050”, 111° Lobe Centers (Good Vacuum for power brakes.) |
| Rocker Arms: |
1.5 Ratio, Full Roller with Extra Large Trunions |
| Intake: |
Performer RPM Air Gap, Dual Plane |
| Cylinder Heads: |
Aluminun, 2.02/1.60 Stainless Valves, 67cc Chambers, 170 cc Intake Port Volume for Great Throttle Response |
| Carburetor: |
Quick Fuel 750 Vacuum Secondary, Dual Feed, Auto Electric Choke, Custom Calibrated |
| Distributor: |
High Energy, HEI Polished Aluminum Housing |
|
 |
 |
|
|
|
| Smeding 383 Extreme Options |
|
| Call For Details |
| (916) 638-0899 |
|
|
|
|
